RASおよび養殖フローシステム用集水タンク | YUTANK

特徴

• 複数タンク統合のためのモジュラー設計
  集中型または分散型の給水を必要とするRASシステムに対応しています。フローループ構造に応じて、側面または底面の出口を設置できます。

• 耐久性の高いPPまたはFRP構造
  淡水・海水両方の環境に適しています。FRPコーティングタイプは、塩水や消毒剤に対する耐薬品性が向上しています。

• 強化された底部入口チャンバー
  内部のコーンまたはバッフルベース構造は、流入を誘導しながら乱流を最小限に抑えます。これにより、マイクロバブルの逆流が低減し、出口側でのスラッジの堆積を抑制します。

• カスタムフランジインターフェースオプション
  出口/入口配管には、PVC、HDPE、またはステンレス鋼製のフランジが使用可能です。ガスケットは、お客様の国の配管基準に合わせて選択できます。

• メンテナンスと検査のためのトップアクセス
  広口アクセスまたは密閉されたマンホールにより、内部の迅速な検査、清掃、または必要に応じて追加のバルブの改造が可能です。

• アンチサージフロー制御バッフル
  特にポンプ流量が変動するシステムに有効です。バッフルは水の流入量を緩衝し、UVフィルター、バイオフィルター、ポンプ室への圧力ショックを回避します。

• オプションの統合レベルセンサー
  スマート RAS システムをお持ちのユーザーの場合、タンクには工場出荷時に超音波またはフロートベースの水位検出モジュールが取り付けられた状態で納品されます。

Order Fulfillment

Packaging & Protection
All tanks are packaged using export-grade wrapping—multi-layer stretch film with edge guards for surface integrity. For bulk orders or fragile tank types (e.g., large-diameter PP or FRP units), reinforced wooden crates and pallet bases are applied to prevent deformation during cross-border transport. UV protection covers are optionally included for open-yard storage before installation.

Logistics & Transport
Units are typically consolidated in 20ft or 40ft HQ containers depending on the quantity and tank height. Volume-optimized stacking is used for cylindrical models, with nested placement to reduce CBM. Shorter tanks (under 1000L) may be packed vertically to increase load efficiency. All shipments comply with international freight standards for aquaculture-grade plastics and water systems.

Lead Time & Production Capacity
For standard sizes (500–1500L), the lead time averages 12–15 working days after deposit confirmation. Custom-capacity tanks or those with non-standard fittings (e.g., multi-inlet flange layouts or integrated sensor housing) may require 18–25 days. Peak season orders are handled via rolling production and early-slot reservations.

Delivery & Documentation
All deliveries include commercial invoice, packing list, container load plan, and if needed, Certificate of Origin (Form E, Form A, or RCEP). CE compliance declaration and food-grade material certificate are included by default. OEM labeling and custom logo branding are supported upon prior confirmation.

Frequently Asked Questions

Clarifications Sourced from Real Procurement Calls and RAS Design Reviews

1. How are your collection tanks typically integrated into a RAS layout?
They're usually placed right after the mechanical filtration or drum filter, acting as a temporary buffer before water enters the biofilter. Some farms place them slightly sunken to allow gravity return. We've seen this especially in older hatcheries being upgraded with modern piping.

2. Are these tanks pre-molded or welded on demand?
Depends on the size and shape. Smaller circular tanks (<3m diameter) are often pre-formed using rotational molding. Larger rectangular or custom footprint tanks are hot-air welded on site or pre-assembled in panels and sealed at the client facility. Our team has done both for European and Southeast Asian projects.

3. What’s the standard outlet configuration? Can I get side discharge instead of bottom?
Standard units come with a DN100 or DN150 bottom drain, but side discharge can be added on request—common in retrofits where floor drilling is not allowed. We’ve shipped multiple units with dual outlets for farms running split filtration lines.

4. Do you offer baffled designs to manage flow turbulence inside the tank?
Yes. We can include internal partitions, deflectors, or mesh screens to slow incoming velocity and settle fine solids. One of our clients in Saudi Arabia used a baffled collection tank to handle inconsistent return flows from multiple raceways.

5. How do you pack large tanks for export shipping?
We disassemble the side walls and stack panels flat-packed when possible. For one-piece tanks, we build steel-frame cradles with impact buffers and anti-UV stretch wrap. Labeling is done according to ISPM-15 and marine export requirements. Cranes or forklifts are usually needed at port of entry.

6. Can I get a quote including freight and clearance to my farm location?
Yes. Provide your port or final delivery city, and we’ll quote CIF or DDP terms. For repeat clients, we also handle split container loads if they're ordering filter equipment or skimmers at the same time.

7. What if I need matching lids, overflow outlets, or sensor ports?
Not a problem. We fabricate tank covers (full or partial), flange ports for ultrasonic level sensors, and custom overflow elbows with screen guards. All accessories can be pre-mounted before shipment if specified during order.

FAQ（Frequently Asked Questions）

Q1: How do I size a protein skimmer for my RAS system?
A: Sizing depends on daily feed input and system turnover. A rule of thumb is 1 m³/h skimming capacity per 100–150 grams of daily feed. For intensive farms with heavy bio-loads, higher ratios may be required.

Q2: Can I use your skimmer with ozone safely?
A: Yes. Our standard models are ozone-compatible. For prolonged use, we recommend units with titanium venturi and ozone-resistant O-rings. Let us know your ozone dosage during inquiry.

Q3: What's the maintenance cycle like?
A: We recommend daily draining of the foam collection cup and bi-weekly cleaning of the reaction chamber. All parts are accessible without tools, which reduces service time.

Q4: Is it suitable for marine fish larvae systems?
A: Absolutely. Fine-tuned bubble production makes our skimmers ideal for sensitive species and hatchery environments. They remove organics before ammonia conversion, preserving water quality during early-stage rearing.

Q5: Can I customize inlet/outlet configurations?
A: Yes. We offer flexible plumbing configurations, including left/right side inlets, bottom discharge, and vertical top-return piping. CAD installation drawings available on request.